AMP-D 10
AMP-D10 needle valve hot nozzle structure technical features
- Valve gate hot nozzle, driven valve needle sealing gate by mechanical means such as air pressure or oil pressure. The valve gate does not have a casting phenomenon, but only a very small circle is left on the surface of the product, which is suitable for a variety of surface -required products.
- Because the valve gate hot nozzle can open a larger gate, it can provide a higher injection rate and faster injection speed, so that the molded products have better performance, especially for a large number of sensitive agents The thermoplastics provide lower injection pressure and do not clog the gate easily.
- The color change performance is better, and the timing of different gates can be adjusted through timing control to achieve higher product requirements.
- The AMP-D10 can provide better gate temperature than the AMP-D9 structure. The mold opening process is simple, but the product surface has one more outer circle and the color change performance is better.